Reverse osmosis housing is specially designed for membrane separation applications such as pure water production, wastewater treatment, water recycling and sea water desalination.<br />
The product is available in both end port and side port; pressure rating from 150 psi to 1200 psi and length from 1 through 7 membrane elements.<br />
The product quality meets international standard such as ASME.<br />
Features:
‐ Smooth inner surface finishing for easy loading and unloading of membrane elements
‐ Both end entry and side entry are available
‐ Different size of side port connection is available in Side entry vessels
‐ Outer polyurethane paint for VU resistant
‐ Head seal area is formed on the mandrel surface, therefore more accurate.
‐ The head seal is captured and does roll during installation of head assembly
‐ Down‐stream conical shape thrust cone improve water flow pattern and allow installation of head assembly in any angle
‐ ISO9001:200 certification
‐ 100% hydro test at 1.5X operating pressure
Specification:
Specifications: |
End Entry |
Side Entry |
Available pressure rating (psi) |
150/250/300/450/600/800/1000/1200 |
|
Length (No. of elements) |
1 to 7 |
|
Shell Material |
FRP |
|
Shell Color |
White (other colors are available on request) |
|
Feed/reject port |
||
Size |
1.5” |
1.5”/2.0”/2.5” |
Connection |
Groove end |
|
Material |
SS316 (duplex SS for 1000 psi and above) |
|
Permeate port |
||
Size |
1” |
|
Connection |
Female NPT/BSP |
|
Material |
ABS |
|
Head assembly*1 |
Included |
|
Adaptor*2 |
included |
|
Straps and saddles |
included |
|
Packaging*3 |
PVC plastic wrapping with carton outer pack |
|
Max. operating Temp |
50℃ (122℉) |
Note:
*‐ Head assembly consists of Retainer lock bars, cast Aluminum bearing plate, ABS seal plate and lock nut, Head seal, permeate port o‐ring.
* – 0.125” OD Standard adaptor is provided. Adaptor of different dimension are available on request.
* – wooden crate for export packing.
All specifications mentioned above are subject to change without prior notice.
Ordering guide
Product Data Sheet | |
Product Name: |
Reverse osmosis housing 8040 side port |
Number of element/vessel |
1 to 7 |
Membrane Type: |
8' x 40" spiral wound element |
Operating data: |
|
Operating pressure: |
250/300/450/600/800/1000/1200 psi |
Operating Temperature range: |
‐7℃ to 49℃ |
Permeate port back pressure: |
125 psi (8.6 bars) Max. |
Hydrostatic Test pressure: |
1.5 X operating pressure for 20 minutes |
Vessel dimensions: |
Refer to Drawing No (Table 1) |
Net weight: |
Refer to Drawing No (Table 1) |
Feed/concentrate port: |
|
Pipe size: |
1.5" IPS groove end standard (2.0" and 2.5" available) |
Number of port: |
2 as standard, multiport are available on request |
Port material: |
SS316 for 300 thr 600 psi,Duplex SS for 1000 and 1200 psi |
Side port Clocking: |
0o as standard, (90o, 180o and 270o cocking are available) |
Permeate port: |
|
Pipe size: |
1" FNPT |
Port material: |
30% Glass filled ABS |
Shell Color: |
White |
Accessories included: |
|
Straps, strap screws and saddles 2 sets below 3 element; 3 sets for 4 to 7 elements |
|
label |
4 ea |
Adaptor |
2ea |
Head assembly |
2 sets |
Head seal |
2 ea |
Adaptor o‐ring seal |
4 ea |
Packing: |
|
Individual vessel |
Plastic bubble wrap |
Bulk |
Wooden crate |
Contact:
Email:
http://www.rowater-ts.com/